Engineered to mitigate thermal bridging, eliminate acoustic leakage, and ensure airtight sealing across residential, commercial, and high-rise curtain wall applications.
In contemporary building envelope engineering, fenestration assemblies—including windows, entrance doors, curtain walls, and skylights—represent the most thermally sensitive intersections of any structural facade. According to global building science assessments, uncontrolled air leakage and thermal conduction through poorly sealed perimeter gaps account for up to 30% to 40% of overall HVAC energy dissipation in both residential and commercial buildings. As international sustainability standards such as LEED, BREEAM, and the European Energy Performance of Buildings Directive (EPBD) enforce increasingly rigorous U-value and air-permeability benchmarks, the engineering of high-performance sealing profiles for building thermal insulation and draught proofing has transformed from an auxiliary fitting into a critical discipline of architectural envelope design.
Draught proofing is directly intertwined with convective thermal dynamics. When cold outdoor air infiltrates living spaces through fenestration perimeters during winter, it induces cold interior drafts, depresses internal mean radiant temperatures, and drives up heating load requirements. Conversely, in hot and humid climatic zones, untreated humid airflow infiltration forces air-conditioning systems to work excessively while inducing interstitial condensation inside wall and frame cavities. Installing scientifically engineered, multi-cavity elastomeric profiles creates continuous airtight and watertight micro-barriers that stabilize interior microclimates and permanently curtail parasitic energy expenditure.
Precision-engineered EPDM and PU sealing strips create uniform contact pressures along sash-frame rebates, achieving Class 4 airtightness under EN 12207 (≤ 3 m³/(h·m²) at 100 Pa) and preventing draught-induced thermal decay in ultra-low energy and Passive House construction.
Achieving resilient building thermal insulation and durable draught proofing over decades requires specialized elastomer compounds capable of enduring intense UV radiation, wide temperature fluctuations (-40°C to +120°C), and cyclic compressive loads without developing permanent plastic deformation. Several advanced material categories dominate modern industrial fabrication:
Synthesized Ethylene Propylene Diene Monomer provides unbeatable ozone resistance, low thermal conductivity (approx. 0.038 - 0.055 W/m·K for cellular forms), and superior memory retention, ensuring continuous airtight rebates across 25+ years of operational service life.
Combining rigid PP/PVC bases with ultra-resilient soft EPDM or TPV sealing lips. The rigid spine anchors securely inside aluminum or uPVC grooves without elongation, while the micro-cellular bulb conforms seamlessly to irregular rebate gaps.
Encapsulated in high-strength, anti-friction embossed polyethylene film, the open-cell PU foam interior delivers exceptionally low closing resistance combined with maximum acoustic dampening and draught isolation for high-end entry and interior systems.
Selecting the optimal sealing profile formulation tailored to project climate conditions, structural loads, and acoustic targets.
| Property Parameter | EPDM Rubber Profiles | PU Coated Foam Strips | Soft-Hard Co-Extrusion (TPV/PVC) | Silicone Profiles |
|---|---|---|---|---|
| Operating Temperature Range | -45°C to +130°C | -35°C to +90°C | -30°C to +85°C | -60°C to +200°C |
| Compression Set (22h @ 70°C) | < 20% (Excellent Recovery) | < 15% (Ultra-Low Deflection) | 25% - 35% (Moderate) | < 18% (Superior Elasticity) |
| Thermal Conductivity (λ) | 0.040 - 0.065 W/(m·K) | 0.032 - 0.042 W/(m·K) | 0.070 - 0.110 W/(m·K) | 0.120 - 0.160 W/(m·K) |
| Acoustic Attenuation (Rw) | 36 - 44 dB | 38 - 48 dB | 32 - 40 dB | 35 - 42 dB |
| UV & Ozone Resistance | Outstanding (ISO 1431) | High (PE Film Shielded) | Moderate to High | Immune to UV Degradation |
| Primary Application Scope | Curtain Walls & System Windows | Acoustic Doors & Casements | Sliding Doors & Louvers | Extreme Climate Facades |
Custom-engineered profile geometries providing hermetic sealing integrity across demanding structural contexts.
In mid-to-high-rise glass curtain walls, wind loads generate immense cyclic pressures. Dual-lip EPDM central gasket systems channel rainwater away through integrated drainage channels while creating an isobaric cavity that permanently prevents wind whistling, drafts, and thermal bridging at transoms and mullions.
Passive house fenestration demands triple-pane glazing paired with multi-cavity sealing gaskets. By introducing hollow, micro-cellular air chambers within the gasket body, internal convective heat loss is halted, preventing frost build-up, frame condensation, and moisture-induced mold colonization.
For modern off-site modular buildings and high-traffic institutional facilities, self-gripping soft-hard co-extruded sealing strips enable rapid, tool-free push-in installation. They accommodate construction tolerances, prevent structural drafts, and maintain fire-resistant draught barriers.
More than 20 years ago, Mr. Yu Hongdao, the founder, came to Foshan after graduating from university, a city with profound manufacturing foundation. During his research on local building materials industry, he found prominent pain points in the door and window sealing strip industry: uneven product quality, and inferior sealing strips are prone to aging, air leakage and poor sound insulation, which greatly reduce the overall performance of doors and windows.
With the original intention of manufacturing high-quality sealing strips to optimize door and window sealing performance, Mr. Yu devoted himself to this industry and joined a leading local sealing strip manufacturer. After years of accumulation in production technology, product R&D and market operation, he was determined to establish a professional factory focusing on high-standard sealing strips. With the full support of his wife Ms. Li Xiaoyan, Foshan Nanhai Kangsu Decoration Materials Co., Ltd. was officially founded in 2008.
After over 18 years of steady development, we have expanded to a 4,000 square meters standardized factory building equipped with more than 20 automatic production lines, realizing full-automatic intelligent production and greatly improving production efficiency and product stability.
Production Base: Located in Foshan, China’s core building materials production base, we are a professional manufacturer focusing on door and window sealing strips. We integrate independent R&D, design, production, sales and customized one-stop services. Our own brand Mikangwang enjoys a high reputation in the sealing accessories industry for reliable quality.
Certification System: Our factory has passed ISO9001 quality management system certification with strict full-process quality control standards. We have long-term cooperative relations with well-known door and window brands and large-scale construction projects at home and abroad. Adhering to original craftsmanship and consistent strict quality inspection, we keep providing reliable and cost-effective sealing solutions for global customers.
The building insulation industry is experiencing a technological revolution propelled by digital transformation and material innovation. At Kangsu Decoration, integration of AI-assisted continuous extrusion ensures dimensional tolerance controls down to ±0.05mm across complex geometries. Laser profile scanners continuously monitor wall thicknesses, bulb diameters, and insertion barb angles in real time, automatically compensating extrusion line speeds and vulcanization microwave power to eliminate structural defects.
Furthermore, decarbonization targets are driving the development of bio-based thermoplastic vulcanizates (TPVs) and post-consumer recycled EPDM compounds that maintain full mechanical elasticity while cutting embedded carbon footprints by over 40%. The next generation of sealing profiles will also integrate micro-encapsulated phase change materials (PCMs) within the profile matrix, allowing the gasket itself to actively store and release latent heat at window perimeters, eliminating the last frontier of architectural thermal bridging.
EPDM possesses exceptional chemical cross-linking that prevents permanent deformation under continuous compression across -40°C to +120°C. Standard PVC tends to stiffen and shrink in extreme cold and soften in heat, leading to premature draught leakage and thermal loss.
The micro-cellular polyurethane foam absorbs acoustic wave frequencies while adapting to irregular frame tolerances with minimal closing resistance. The protective outer PE skin prevents moisture absorption and reduces friction, ensuring silent, draught-free operation.
Yes. Our in-house R&D tooling center designs custom dies within 7 to 10 working days. Rigid backbones are tailored to lock into proprietary aluminum or uPVC grooves while soft sealing bulbs are engineered for precise compression ratios.
Our facility operates under ISO9001 quality systems. Products comply with RoHS, REACH, ASTM C864, and DIN 7863 standards for architectural window and facade weatherstripping.
Browse our complete lineup of custom OEM/ODM EPDM, PVC, and PU coated architectural weatherstripping profiles.